AEG T86280IC - Manual (Page 14)

SWITCHING ON THE
APPLIANCE
Push the On/Off button to activate or
to deactivate the appliance. When the
appliance is on, some indications come
in to the view on the display.
AUTO STAND-BY FUNCTION
To decrease the energy consumption,
the automatic stand-by function deacti-
vates the appliance:
• if the Start/Pause button was not
pushed in the time of 5 minutes.
• after 5 minutes from the programme
end.
Push the On/Off button to activate the
appliance.
SETTING A PROGRAMME
Use the programme dial to set the pro-
gramme. The possible time to com-
plete the programme come into view
on the display.
The drying time you see is rela-
ted to the load of 5 kg for cot-
ton and jeans programmes. For
the other programmes the dry-
ing time is related to the recom-
mended loads. The drying time
of the cotton and jeans pro-
grammes with the load more
than 5 kg is longer.
SPECIAL FUNCTIONS
Together with the programme you can
set 1 or more special functions.
To activate or deactivate the function
push the applicable push button.
When the function is activated the LED
above the push button or symbol on
the display comes into view.
THE DRY PLUS FUNCTION
This function helps to get the laundry
more dried. There are 3 possible selec-
tions:
- the default selection which is rela-
ted to the programme.
— the selection to get the laundry
lightly dried.
— the selection to get the laundry
more dried.
THE REVERSE PLUS
FUNCTION
To dry more lightly the sensitive and
temperature sensitive textiles (e.g.
acrylic, viscose). This function helps also
to decrease the creases on the laundry.
For fabrics with the symbol
on the
fabric label.
THE ANTICREASE FUNCTION
Extends anticrease phase (30 minutes)
at the end of the drying cycle to 90 mi-
nutes. This function prevents laundry
from creases. Laundry can be removed
during the anticrease phase.
THE BUZZER FUNCTION
When the buzzer function is activated
you can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
14