AEG BE5304001B - Manual (Page 10)

5.4 Buttons
Button Function Description
CLOCK To set the clock function.
, MINUS, PLUS To set a value for time.
5.5 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display
come on one by one.
The bars show that the oven tempera-
ture increases or decreases.
6. CLOCK FUNCTIONS
SYM-
BOL
FUNCTION DESCRIPTION
MINUTE MIND-
ER
To set a countdown time. This function has no ef-
fect on the operation of the oven. You can set the
MINUTE MINDER at any time, also when the ap-
pliance is off.
TIME OF DAY To set, change or check the time of day. Refer to
“Setting the time”.
DURATION To set how long the appliance must operate. First
set an oven function before you set this function.
END To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
Press again and again to
change the clock function.
Press to confirm the settings
of the clock functions, or wait 5
seconds for the setting to be
confirmed automatically.
6.1 Setting the DURATION or
END
1.
Press again and again until the
display shows or .
or flashes in the display.
2. Press or to set the values and
press to confirm.
For Duration first you set the mi-
nutes and then the hours, for End
first you set the hours and then
the minutes.
An acoustic signal sounds for 2 mi-
nutes after the time ends.
or
symbol and time setting flash in the
display. The oven stops.
3. Press any button or open the oven
door to stop the acoustic signal.
If you press when you set the
hours for DURATION , the
appliance goes to setting of the
END
function.
10 www.aeg.com