AEG BY9314001M - Manual (Page 8)

Refer to chapter "Care and
Cleaning".
4.2 Setting and changing the
time
After the first connection to the mains,
all symbols in the display are on for
some seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows h and 12:00.
Setting the time of day:
1.
Touch or to set the hours.
2.
Touch or .
3. Touch or to set the minutes.
4.
Touch or .
The Temperature / Time display shows
the new time.
Changing the time of day
You can change the time of day only
when the appliance is off. Touch
.
flashes in the display. To set the new
time of day, use the above procedure.
5. CONTROL PANEL
5.1 Electronic programmer
1 2 3 4 5 6 7 8 9 10
Use the sensor fields to operate the ap-
pliance.
Sensor
Field
Function Description
1 - DISPLAY Shows the current settings of the appli-
ance.
2 ON / OFF To activate and deactivate the appli-
ance.
3 OPTIONS To set an oven function, an automatic
programme or a cleaning function (se-
lected models only). Straight access to
an oven function when the appliance is
off.
4 MY FAVOURITE
PROGRAMME
To store your favourite programme.
Use it to have access to your favourite
programme directly or when the appli-
ance is deactivated.
8 www.aeg.com