AEG F78400VI0P - Manual (Page 7)

Consumption values
Programme
1) Duration
(min) Energy
(kWh) Water
(l)
90 - 160 0.9 - 1.7 8 - 15
150 - 160 1.4 - 1.6 13 - 14
30 0.9 10
173 1.03 10
14 0.1 4
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
[email protected]
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate the Multitab option be-
fore you set a programme. You
cannot activate the option while
a programme operates.
5.1 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press and hold, at the same time,
and until the Multitab in-
dicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the wa-
ter hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.2 Acoustic signals
The acoustic signals operate in these
conditions:
• When the programme is completed.
• When he level of the water softener is
adjusted.
• When the appliance has a malfunc-
tion.
Factory setting: On.
It is possible to deactivate the
acoustic signals.
How to deactivate the acoustic signals
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
“Setting and starting a programme”.
2. Press and hold at the same time but-
tons and until the in-
ENGLISH
7