AEG NC4003020M - Manual (Page 9)

6. CLOCK FUNCTIONS
6.1 Electronic programmer
1 2 1
3 4 5
1
Function indicators
2
Time display
3
Button +
4
Selection button
5
Button -
Clock function Application
Time of day To show, set, or change the time.
Minute minder To set a countdown time. This function has no effect
on the operation of the oven.
Duration To set the length of an oven operation.
End To set the switch-off time for an oven function.
You can use Duration and
End at the same time if you
want the appliance to activate
and deactivate automatically:
first set the Duration
and then
the End .
6.2 Setting the clock functions
1. For Duration and End , set an
oven function and temperature. This
is not necessary for the Minute
Minder
.
2. Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.
3. Press + or - to set the necessary
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for
two minutes.
With the Duration and End
functions, the appliance deacti-
vates automatically.
4. Press a button to stop the signal.
ENGLISH
9