AEG L61470BI - Manual (Page 9)

5.4 Start/Pause button 4
Press button 4 to start or interrupt a
programme.
5.5 Delay start button 5
Press button 5 to delay the start of a
programme from 30 minutes to 20 hours.
5.6 Time save button 6
Press the button 6 to decrease the
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
5.7 Extra rinse button 7
Press button 7 to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.8 Spin button 8
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
'Rinse Hold' function is
on.
5.9 Temperature button 9
Press button 9 to change the default
temperature.
= cold water
5.10 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
8 and button 9 at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
5.11 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
6 and button 7 at the same time
until the display shows the symbol .
• To deactivate the function, press but-
ton 6 and button 7 at the same
time until the symbol goes off.
You can activate the function:
• Before you press the Start/Pause but-
ton 4 : the appliance cannot start.
• After you press the Start/Pause button
4 , all the buttons and the pro-
gramme knob are deactivated.
5.12 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
5 and button 6 at the same time
until the indicator of button 7 is on.
• To deactivate the function press but-
ton 5 and button 6 at the same
time until the indicator of button 7 is
off.
ENGLISH
9