Before first use, Initial cleaning, Setting the time – AEG DE4003020M User Manual
Page 8: Pre-heating
To put in the deep roasting pan.
• Deep roasting pan
To bake and roast or as pan to collect fat.
BEFORE FIRST USE
WARNING!
Refer to "Safety information" chapter.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
Setting the time
The oven only operates after time set.
When you connect the appliance to the electrical
supply or in case of a power cut, the Time func-
tion indicator flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops
and the display shows the time of day set.
For time change you must not set an automatic
function (Duration or End
) at the same
time.
To use the appliance, push the control knob. The control knob comes out.
Pre-heating
1.
Set function and maximum temperature.
2.
Let the appliance operate without the food for approximately 1 hour.
3.
Set function and maximum temperature.
4.
Let the appliance operate without the food for approximately 10 minutes.
5.
Set function and maximum temperature.
6.
Let the appliance operate without the food for approximately 10 minutes.
This is to burn off the residue in the appliance. The accessories can become more hot than
usually. When you pre-heat the appliance for the first time, the appliance can make an
odour and smoke. This is the usual effect. Make sure the airflow is sufficient.
8
Before first use