beautypg.com

Options, Before first use, 1 multitab option – AEG F88060VI0P User Manual

Page 8: Activating the multitab option, 2 öko plus, 3 acoustic signals

background image

5. OPTIONS

5.1 Multitab option

Activate this option only when you use
the combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are
off.
The programme duration can increase.

Activating the multitab option

Activate or deactivate the multi-
tab option before the start of a
programme. You cannot activate
or deactivate this option while a
programme operates.

1. Press the multitab button, the multi-

tab indicator comes on.

If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Set the water softener to the highest

level.

2. Make sure that the salt container and

the rinse aid dispenser are full.

3. Start the shortest programme with a

rinsing phase, without detergent and
without dishes.

4. Adjust the water softener to the wa-

ter hardness in your area.

5. Adjust the released quantity of rinse

aid.

5.2 ÖKO PLUS

This option decreases the temperature
in the last rinse phase.
The use of this option decreases the en-
ergy consumption (up to 25%) and the
programme duration.
The dishes can be wet at the end of the
programme.

5.3 Acoustic signals

The acoustic signals operate in these
conditions:
• When the programme is completed.
• When he level of the water softener is

adjusted.

• When the appliance has a malfunc-

tion.

Factory setting: On.
It is possible to deactivate the
acoustic signals.

Deactivating the acoustic signals
1.
Press the on/off button to activate

the appliance. Make sure that the ap-
pliance is in setting mode, refer to
‘Setting and starting a programme’.

2. Press and hold at the same time but-

tons

and

until the indicators

of buttons

,

and

start to

flash.

3. Press button

.

The indicators of buttons

and

go off.

• The indicator of button

contin-

ues to flash.

• The display shows the current set-

ting.

On

Off

4. Press button

to change the set-

ting.

5. Deactivate the appliance to confirm

the setting.

6. BEFORE FIRST USE

1. Make sure that the set level of the

water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local

water authority to know the water
hardness in your area.

2. Fill the salt container.

8

www.aeg.com