beautypg.com

Troubleshooting, 1 cleaning of the spark plug, 2 periodic maintenance – AEG HG654320UM User Manual

Page 10

background image

WARNING!
Do not slide cookware over the
glass because it could scratch
the surface. Also, do not let hard
or sharp objects fall onto the
glass or hit the edge of the hob.

6.1 Cleaning of the spark plug

This feature is obtained through a ce-
ramic ignition candle with a metal elec-

trode. Keep these components well
clean to prevent difficult lighting and
check that the burner crown holes are
not obstructed.

6.2 Periodic maintenance

Periodically speak your local Service
Force Centre to check the conditions of
the gas supply pipe and the pressure ad-
juster, if fitted.

7. TROUBLESHOOTING

Problem

Possible cause

Remedy

There is no spark when
lighting the gas

• There is no electrical

supply

• Make sure that the

unit is connected and
the electrical supply is
switched on.

• Control the fuse. If the

fuse is released more
than one time, refer to
a qualified electrician.

• Burner cap and crown

are placed uneven

• Make sure that the

burner cap and crown
are in correct posi-
tions.

The flame is blow out im-
mediately after ignition

• Thermocouple is not

heated sufficient

• After lightning the

flame, keep the knob
pushed for approxi-
mately 5 seconds.

The gas ring burns un-
evenly

• Burner crown is

blocked with food resi-
dues

• Make sure that the in-

jector is not blocked
and the burner crown
is clear of food parti-
cles.

If there is a fault, first try to find a solu-
tion to the problem yourself. If you can-
not find a solution to the problem your-
self, speak your dealer or the local Serv-
ice Force Centre.

If you operated the appliance in-
correctly, or the installation was
not carried out by a registered
engineer, the visit from the cus-
tomer service technician or deal-
er may not take place free of
charge, even during the warranty
period.

These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They
are available at Service Force Centre and
approved spare parts shops.

10 www.aeg.com