AEG A81000TNW0 - Manual (Page 16)

8.6 Door reversibility
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power
socket.
• Tilt back the appliance carefully so
that the compressor cannot touch the
floor.
• Remove the plinth.
• Unscrew and remove the lower hinges.
• Remove the door.
2
1
• Unscrew the upper pin and screw it on
the opposite side.
A
B
• Unscrew the pin (A) and screw it on
the opposite side.
• Remove the cap (B) and position it on
the opposite side.
• Fit the handle on the opposite side in
the free holes.
16 www.aeg.com