AEG F99015VI0P - Manual (Page 10)

Display
The display shows:
• The electronic adjustment of the level of the water softener
• The activation and deactivation of the rinse aid dispenser (only with the multitab func-
tion on)
• The number of the washing programme
• The remaining time to the end of the washing programme
• The end of a washing programme (the display shows a zero)
• The time of the delay start
• The alarm codes
• The activation and deactivation of the acoustic signals.
• The setting of the colour of the TimeBeam.
Delay touchpad
Press this touchpad again and again to delay the start of the washing programme from 1 to
24 hours.
Programme touchpad
Press this touchpad again and again to set a washing programme. Each time you press the
touchpad, the display shows a number that is related to a washing programme. Refer to
'Washing programmes'.
Extra-Hygiene touchpad
This function gives better results for the hygiene. During the rinsing phase, the temperature
stays at 70°C for 10 to 14 minutes.
Press this touchpad to activate the function. The related indicator comes on.
ÖKO PLUS touchpad
This function decreases the temperature in the drying phase. The power consumption de-
creases by 25%.
The dishes can be wet at the end of the programme when you open the appliance door. We
recommend that you keep the door ajar and let the dishes dry.
Press this touchpad to activate the function. The related indicator comes on.
Multitab touchpad
Press this touchpad to activate or deactivate the multitab function.
When you activate the function, the related indicator comes on.
When you deactivate the function, the related indicator goes off.
RESET touchpad
Press this touchpad to cancel a washing programme in operation
Setting mode
The appliance must be in setting mode for these operations:
• To set and start a washing programme.
10 Control panel