AEG Automatic Charger AG 1208 - Manual (Page 24)

24
Connecting the battery
Risk of electrical shock!
always verify the charging device is disconnected from the 230 V aC
outlet when connecting to a battery
▪
always ensure the area around the battery is well ventilated during the charging
process
1 Connect the positive charging clamp (red) to the positive battery terminal
(marked P or +)
2 Connect the negative charging clamp (black) to the body of the vehicle, or in
exceptions to the negative battery terminal (marked n or -)
3 Verify both terminal clamps make good contact with the respective terminals
4 Plug the power plug into a suitable aC mains outlet
In the event of reverse polarity the “Polarity” led will light up red
Charging will not start
Product overview AG 1208, AG 1210, AG 1212
9
1
5
2
3
4
6
7
8