1 adjusting the water softener, Manual adjustment, Electronic adjustment – AEG F88072W0P User Manual
Page 9
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
51 - 70
91 - 125
9.1 - 12.5
64 - 88
2
1)
10
43 - 50
76 - 90
7.6 - 9.0
53 - 63
2
1)
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
2
1)
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
2
1)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
2
1)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
2
1)
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold Delay and Start at
the same time until the indicators (A),
(B) and (C) flash.
4. Press Program.
• The indicators (B) and (C) go off.
• The indicator (A) continues to flash.
• The display shows the setting of
the water softener. Example:
=
level 5.
5. Press Program again and again to
change the setting.
6. Deactivate the appliance to confirm.
ENGLISH
9