AEG L61271WDBI - Manual (Page 25)

Problem Possible cause/Solution
Spinning starts late or
the machine does not
spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rota-
tion of the drum. This may happen several times be-
fore the unbalance disappears and normal spinning
can resume. If, after some minutes, the laundry is still
not evenly distributed in the drum, the machine will
not spin.
• The laundry load is perhaps to little, add more
items, redistribute the load manually and then se-
lect the spinning programme.
The machine makes an
unusual noise:
The machine is fitted with a type of motor which
makes an unusual noise compared with other tradi-
tional motors. This new motor ensures a softer start
and more even distribution of the laundry in the
drum when spinning, as well as increased stability of
the machine.
No water is visible in
the drum:
Machines based on modern technology operate
very economically using very little water without af-
fecting performance.
The display shows the
alarm code
:
Anti-flooding system has activated.
• Pull out the plug from the power socket, close the
water tap and contact the Service Force Centre.
13. INSTALLATION
13.1 Unpacking
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
ENGLISH
25