AEG DE4003000B - Manual (Page 7)

After approximately 5 seconds, the flash-
ing stops and the display shows the time
of day set.
You can only change the Time
of day
if :
• the switch-on lock is not on
• none of the clock functions
Duration or End is set
• no oven function is set.
4.3 Preheating
Preheat the empty appliance to burn off
the remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if applica-
ble.
1.
Set the function and the maxi-
mum temperature.
2. Let the appliance operate for one
hour.
3. Set the function and the maxi-
mum temperature.
4. Let the appliance operate for ten mi-
nutes.
5. Set the function and the maxi-
mum temperature.
6. Let the appliance operate for ten mi-
nutes.
Accessories can become hotter than
usually. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
5. CONTROL PANEL
5.1 Control panel
7 6 5 4 2
1
3
Num-
ber
Button Function Description
1 – Display Shows current settings of the oven.
2
Clock function
button
To set a clock function.
3
Setting but-
tons
To set the value for the temperature and
time.
4
Temperature
button
To show an oven temperature.
5
Oven function
selection
To set an oven function or programme.
ENGLISH
7