AEG MC1753E-M - Manual (Page 35)

35 Installation
Electrical connections
WARNING!
THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should this safety measure not be observed.
• If the plug that is fitted to your appliance is not suitable for your socket
outlet, it must be cut off and the appropriate plug fitted.
• Remove the fuse from the cut off plug. The cut off plug should then be
disposed of to prevent the hazard of shocks in case it should be plugged into
a 13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW EARTH
BLUE NEUTRAL
BROWN LIVE
If you fit your own plug, the colours of the wires in the mains lead of your appliance
may not correspond with the markings identifying the terminals in your plug, proceed
as follows:
• Connect the green and yellow (earth) wire to the terminal in the plug which is marked
with the letter ”E” or the earth symbol ( ) or coloured green and yellow.
• Connect the blue (neutral) wire to the terminal in the plug which is marked with the
letter ”N” or coloured black.
• Connect the brown (live) wire to the terminal in the plug which is marked with the
letter ”L” or coloured red.
13
A
M
P
GREEN & YELLOW
13 AMP FUSE
BROWN
CORD CLAMP
BLUE