AEG Eclipse 15 - Manual (Page 12)

10.2.1 Set Answer Mode
tFrom the home screen, press .
tPress again to select “ANS. SYSTEM”.
tPress to “ANSWER MODE” and then press to select.
tPress to select “ANSWER ONLY” or “RECORD MSGS” and then press to confirm.
>A confirmation tone is played.
tPress to return to standby mode.
10.3 Message Playback
When there are new messages on the answering machine, flashes on the handset screen.
tFrom the home screen, press .
tPress again to select “ANS. SYSTEM”.
tPress again to select “PLAY”.
>Your messages will automatically playback through the handset’s speakerphone.
>The display will show the message number and the date and time of the call.
>Press to listen to your messages privately through the earpiece of your handset.
tDuring playback, press and then press to access the following options:
REPEAT Repeat the currently playing message
NEXT Play the next message
PREVIOUS Play the previous message
DELETE Delete the current message
Note: To return to the screen showing the message number and date/time, press .
tPress to return to standby mode.
10.4 Delete All Messages
Note: Only old messages can be deleted. New messages must be played before they can be deleted.
tFrom the home screen, press .
tPress again to select “ANS. SYSTEM”.
tPress to select “DELETE ALL” and then press .
tPress again to confirm.
>A confirmation tone is played.
tPress to return to standby mode.
10.5 Announcement
When the answering system answers a call, the pre-recorded announcement is played to the caller unless
you have recorded your own announcement.
10.5.1 Record a Personal Announcement
You can choose to replace the default announcement with your own personal announcements.
Note: The maximum length of an announcement is 2 minutes.
tFrom the home screen, press .
tPress again to select “ANS. SYSTEM”.