beautypg.com

Daily use, 1 using the detergent, 2 setting and starting a programme – AEG F55402IM0P User Manual

Page 31: The auto off function, Starting a programme, Starting a programme with delay start

background image

Fill the rinse aid dispenser

when the indicator (A)

becomes clear.

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in user

mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent. If you use multi-

tablets, activate the option Multitab.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press or to select a programme.

• The indicator of the selected

programme flashes.

• The display shows the

programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

• The programme indicator stops

flashing and comes on with fixed

light.

• The programme duration starts to

decrease with steps of 1 minute.

If you press the on/off button before the

start of the programme, the appliance

will be in programme selection mode

when you activate it again.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

ENGLISH

31