AEG BE 705 R - Manual (Page 8)

6
English
GB
TECHNICAL DATA
Power screwdriver
BE 705 R
Production code 4165 06 01...
... 000001-999999
Rated input 705 W
Output 566 W
No-load speed 2700 min -1
Speed under load max. 1820 min -1
Static jamming moment * 15 Nm
Drilling capacity in steel 10 mm
Drilling capacity in Aluminium 16 mm
Drilling capacity in wood 30 mm
Drill chuck range 1-10 mm
Drive shank 1/2 ˝
Weight according EPTA-Procedure 01/2003 1,6 kg
Noise/Vibration Information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
Wear ear protectors!
85 dB(A)
96 dB(A)
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Drilling into metal:
Vibration emission value a
h
Uncertainty K=
<2,5 m/s 2
1,5 m/s 2
Screwing:
Vibration emission value a
h
Uncertainty K=
<2,5 m/s 2
1,5 m/s 2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instructions,
including those given in the accompanying brochure. Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a „live“ wire may make exposed metal parts of the power
tool „live“ and could give the operator an electric shock.
Hold power tool by insulated gripping surfaces, when perfor-
ming an operation where the fastener may contact hidden
wiring or its own cord. Fasteners contacting a „live“ wire may
make exposed metal parts of the power tool „live“ and could give the
operator an electric shock.