Setting and starting a programme, Interrupt a programme, Cancel a programme – AEG L85275XFL User Manual
Page 19: Change a function
4.
To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash
phase.
– Do not set the delay start
function.
5.
Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The re-
lated programme indicator comes
on.
2. The indicator of button
4
flashes
with red colour.
3. The display shows the default tem-
perature, the spin speed and the
empty indicator bars of the availa-
ble functions.
4. To change the temperature and/or
the spin speed, press the related
buttons.
5. Set the available functions.
6. Press button
4
to start the pro-
gramme. The indicator of button
4
is on.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1. Press button
4
. The indicator
flashes.
2. Press button
4
again. The wash-
ing programme continues.
CANCEL A PROGRAMME
1. Press button
1
to cancel the pro-
gramme and to deactivate the ap-
pliance.
2. Press button
1
again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Press button
4
. The indicator
flashes.
2. Change the function set.
ENGLISH
19