AEG LAVATHERM 57700 - Manual (Page 20)

Drying
20
Removing laundry or loading laundry when necessary
You can interrupt the drying process at any time to remove some of the
laundry or to add more laundry.
3
You can see by looking at the display field RUN TIME,
how long the drying program will probably still take.
This display becomes increasingly accurate, the longer
the drying process has already been running.
0 Open the door.
1
Caution! The laundry and the drum may be hot.
0 Remove or add more laundry.
0 Close the door.
0 Press the START/PAUSE button to resume the drying proc-
ess.
End of the drying process
The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase.
After the cooling phase you can remove the laundry from the dryer.
The crease guard phase follows automatically after the drying process.
The drum rotates intermittently. This keeps your laundry loose and
crease-free.
If you have pressed the AUDIBLE SIGNAL button, an
acoustic signal is sounded intermittently during this
phase.
Removing the laundry
0 Open the door and remove the laundry.
Switch-off the dryer
0 Turn the program selector to the OFF position.