Audiovox Mobile Video 128-8342 - Manual (Page 22)

TROUBLESHOOTING
22
PROBLEM
IR remote inoperative
? Verify that the batteries in the remote are fresh.
? Verify that the remote sensor eye is not obstructed.
? If monitor is set to M1, press M1 button on remote; If monitor is set to M2, press
M2 on remote.
Disc won't play
No sound or distorted sound
Play starts, but then stops immediately
? Insert a disc with the label side facing up.
? Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs
and MP3s.
? Both the unit and the disc are coded by region. If the regional codes don't match,
the disc can't be played. This DVD player is set to Region Number 1.
? Make sure your DVD is connected properly. Make sure all cables are securely
inserted into the appropriate jacks.
? If you are using the 2-channel IR headphones, make sure you turn on the IR
headphone power, make sure the correct channel (A-B) is selected.
? Make sure the Modulator is ON and the proper Frequency has been selected on
the DVD player and car radio.
? Make sure that unit is set to M1 when using Single Channel Headphones.
? The disc is dirty. Clean it.
? Condensation has formed. Allow player to dry out.
Can t advance through a movie ' ? You can t advance through the opening credits and warning information that
appears at the beginning of movies because the disc is programmed to prohibit that
action. '
SOLUTION