AEG OKO-LAVAMAT 76760 - Manual (Page 21)

Operating Instructions
21
Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
0 Press the spin speed/RINSE HOLD button as often
as necessary, until the indicator for the desired spin
speed is illuminated.
3 If you do not change the spin speed, the final spin
will be adjusted automatically depending on the
type of wash cycle:
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Press the spin speed/RINSE HOLD button as often as necessary, until the
RINSE HOLD indicator is illuminated.
3 If RINSE HOLD is selected, the washing will remain in the final rinse wa-
ter and will not be spun.
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER allows the start of a washing program to be
advanced by 1 to a maximum of 19 hours.
0 To do this, press the button DELAY TIMER as
often as necessary until the required start de-
lay is shown in the multidisplay, e.g.12h for a
program start delay of 12 hours.
If19h is shown and you press again the run
time of the set washing program appears
(display in minutes, e.g.120).
In this state, the delay timer is not set.
– COTTONS/LINEN 1600 revolutions per minute
– EASY CARES/EASY IRON 1200 revolutions per minute
– DELICATES 1200 revolutions per minute
– WOOL/SILK /
P (Hand Wash)
1200 revolutions per minute