AT&T E5640 - Manual (Page 30)

28
Answering System Operation
Changing feature options
Menu features can be changed to customize how the
answering system operates. Press
MENU
repeatedly to
hear each feature. Press
CHANGE
when you hear the
feature you want to modify.
Feature options (Default settings underlined).
System announces: Feature description:
1. MENU
3. MENU
Or
Press until desired feature
is heard (see list at right).
Press until desired selection
is heard.
Press to set selection and
move to next menu option.
Press to set selection and
exit menu.
2. CHANGE
“Change announcement”
Options: [record announcement]
“Change remote access code”
Options: [enter 2-digit code] 19
“Change message alert”
Options: On / Off
“Change announce only”
Options: On / Off
“Change base ringer”
Options: On / Off
“Change number of rings”
Options: 2 / 4 / 6 /Toll Saver
Press REC/MEMO to record you out-
going announcement (see page 26).
Press STOP to stop recording.
Enter a two-digit number (10-99) for remote
access from another phone (see page 32).
When on, the telephone beeps every 10
seconds when you have new messages.
When on, callers hear an announcement
but cannot leave messages (see page 27).
Choose this option to turn the base ringer
on or off (does not affect handset).
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.
NOTE: Press and hold CHANGE to advance the remote access code
number by 10.
(Play/Stop)
91-000353-010-000_E5640_R4.qxd 7/1/2005 12:24 PM Page 28