Asante Technologies Network Camera 8001 - Manual (Page 2)

SPECIFICATIONS
Network Camera
MPEG4/MJPEG
SecureNet NetCam Series
Camera Specification
Sensor type
Color 1/3” CCD Sensor
Scan Method Interlace
Minimum Illumination 0.2 Lux @ F 2.0
S/N ration More than 48dB
Gamma Characteristic 0.45
6 . 3 f s n e L ° F2.0 Board Lens, full glasses
Pan range -135 ° ~ 135°(Max120°/sec.)
Tilt range -45 °~ 90° (Max120°/sec.)
Preset numbers 16
Auto white balance Yes
Auto gain control Yes
Backlight Compensation Yes
Video
Video compression
MPEG4 / JPEG (dual codec), H.263 (for 3GPP)
Video frame rate up to 30fps for all video resolutions
Compression rate selection 5 levels: best, better, normal, faster, fastest
Frame rate setting
NTSC: 1,2,3,4,5,6,7,10,15,30 fps ; PAL: 1, 2,3,4,5,6,12,25 fps
Video resolution NTSC:176x112, 320x240, 640x480, 704x480
PAL:176x144, 352x288, 640x480, 704x576
Image rotation
Mirror / Up side down
Digital zoom Yes, x 1/2, x1, x 2, x 4 times
Motion detection Yes (3 windows)
Audio
Internal Microphone
Sensitivity: 62 dB
Communication
LAN port
RJ-45, 10/100M auto-sensed, auto crossover
Communication protocol HTTP, RTSP, FTP, SMTP, TCP/IP, UDP, ARP, ICMP, DHCP, PPPoE, DDNS, UPnP, SAMBA, 3GPP
Video Streaming
Multicasting / RTSP / Over HTTP
System
U P C C S I R t i b 2 3 U P C
RAM
32MB
Flash ROM 4M Byte
x u n i L C u S O
I/O
Alarm Input
2
Alarm output 1
Analog video output 1
Analog audio output 1
Software
Browser
Internet Explorer 6.0 or above
Application Software CentaView application software
OS supported Microsoft Windows 2000, XP
Software Features
1. System
Name
LED Control: ON/OFF/FLASH
2. TCP/IP Static IP Address
- IP Address
- Subnet Mask
- Default Gateway
Dynamic IP Address
- DHCP
- PPPoE
--User ID
--User Password
Primary DNS Address
Secondary DNS Address
Dynamic DNS
UPnP
IP Filter
3. Users Three levels
Administrator / Operator / Viewer
4. Date/ Time Setting Date: Year/Month/Day
Time: Hour/Minute/Second
NTP Protocol
NTP Server Address
Time Zone
5. Video
Compressing Rate
5 levels: best, better, normal, faster, fastest
Frame Rate NTSC: 1,2,3,4,5,6,7,10,15,30 fps ; PAL: 1, 2,3,4,5,6,12,25 fps
Video Resolution NTSC:176x112, 320x240, 640x480, 704x480
PAL:176x144, 352x288, 640x480, 704x576
Brightness Control Yes
Contrast Control Yes
6. Upload configuration FTP
SAMBA
SMTP
7. Dynamic DNS
Service
User Name
Password
Domain Name
8. Motion Detection
Motion Sensitivity is adjustable
Motion mask can be set easily
9. Events
Video loss
Reboot
Motion detection
Alarm-in
Schedule
10. Triggered Actions
Send video e-mail
Upload video file to ftp server
Save video file to network share
Send notification to TCP/HTTP server
Control camera to a preset location
Turn on alarm output
11. P/T Control -135°~-135°(Max -120°/sec.)
-45°~90°(Max -120°/sec.)
Pan / Tilt control
Supports 16 location Preset / Recall control
Supports 5 Camera Touring
Auto Pan
12.Open API CGI commands to control camera
Media SDK to handle streaming
13. Other Reset to factory default setting
Power
Power
DC 12V 1.5A, switching type power supply
Power consumption 10W (800 mA x 12 V), maximum
LED
Link LED
Green color
Alert LED Green color
Size
Main body
128mm(L) x 116mm(W) x 108mm(H)
Operating environment
Operating temperature
5°C ~ 40°C
Storage temperature -20°C~ ~ 50°C~
Humidity 10% ~ 80% non-condensing
EMI
FCC / CE class B
ORDERING INFORMATION
Model Name Description
NetCam 8001 Standard Network Camera with Ethernet Interace
NetCam 8001P Network Camera with Power Over Ethernet Interface
NetCam 8001W Network Camera with Ethernet and Wireless Interface
*
47709 Fremont Blvd, Fremont, CA 94538 USA · Phone 408.435.8388 · Website www.asante.com
© 2008 Asante - a Division of UIC Corporation. All rights reserved. Asante and FriendlyNET are trademarks of UICUSA.
All other names may be trademarks or registered trademarks of their respective owners. Specifications subject to change without prior notice.
A Communication Division of UIC Corporation