Konica Minolta MSP3500 - Manual (Page 65)

2-33
Scann
er
Ch
ap
te
r 2
17. Using Centering and Fit
Once the image on the Screen has been either “manually trimmed” or “auto masked”, the Im-
age Centering function moves the image to the center of the print. The Fit function however,
fits the image on the Screen onto the entire surface of the print.
Screen Image Print Image
Centering
Centering: OFF Centering: ON
Fit
Fit: OFF Fit: ON
Centering
1 Press the Centering/Fit key to turn
ON Centering and then press the Start
key.
Centering/Fit
NOTE
Centering/Fit mode cannot be used if
(Masking) is selected.
Fit
1 Press the Centering/Fit key to turn
ON Fit and then press the Start key.
Centering/Fit
NOTE
Fit mode cannot be used when the
Scanner is connected to the PC.