Konica Minolta MSP3500 - Manual (Page 113)

1. System Care
6-3
Ma
int
ena
nce
Chapter 6
Cleaning the System Printer (Option)
Clean the Printer at regular intervals.
Cleaning the MSP 3500 Printer
When does the printer need cleaning?
Clean this item thoroughly... After...
Exterior Once a month or as needed, whichever
comes first.
Interior (paper feed rollers) Paper stops being fed from the paper
tray(s).
Note: We recommend that you do not clean elsewhere inside the printer.
If necessary, contact the authorized dealer.
What cleaning materials should I use?
Exterior
⎯
Use Exterior
⎯
Avoid
A soft dry cloth to clean the control panel. Sharp or rough implements (such as wire
or plastic cleaning pads or brushes); liq-
uids.
A soft, wrung-out damp cloth to clean the
outside of the printer. Aerosol or pump-sprayed cleaners; too
much dampness in the cloth.
Mild neutral detergent to clean the outside
of the printer, if necessary. Abrasive or corrosive solutions that con-
tain solvents (such as alcohol, benzine, or
thinners).
Interior Paper Feed Rollers
⎯
Use Interior
⎯
Avoid
A soft dry clean cloth. Sharp or rough implements (such as wire
or plastic cleaning pads or brushes); any
liquids.