Avenview HDMI-VS-4X1 - Manual (Page 5)

www.avenview.com 5
Installation

First Time Setup: Turn off all the devices.
 Device Connections:
 Connect HDMI cable from display TV or digital receiver to HDMI-VS-4X1 Switch.

Connect power adapter to HDMI-VS-4X1 Switch and plug it into power socket.
Power on the Switch

Connect HDMI-VS-4X1 Switch and HDMI sources by HDMI cable.

Power on display TV or digital receiver and source devices
Operation

Automatic Switch: Device automatically switches to the last active source connected to
HDMI-VS-4X1 Switch. When display source is unplugged from switch, device automatically
switches to next available channel.

Manual Switch: Simply press the manual switch button on HDMI-VS-4X1 Switch to select
the source.

Remote Control: Press number button on remote control to select corresponding channel.

Auto Scan Function: Activate via remote control “SCAN” button. Can be set at 20, 40, 60, 80
seconds interval. Press “STOP” or manual switch button to stop scanning.