If transferring of the data fails, If transferring of the data fails 21 – Konica Minolta magicolor 7450 grafx User Manual
Page 25
Starting the Firmware Updater
21
If Transferring of the Data Fails
If transferring of the data fails, the following message appears.
1
Click the [OK] button.
2
Check that the printer is ready and that it is correctly connected, and then
click the [Update again] button.
mcPS_Firmware.book 21 ページ ２００７年１０月９日 火曜日 午後２時７分
This manual is related to the following products: