Konica Minolta Magicolor 6100 Series - Manual (Page 24)

Configuring a Port 22
10
Close the Print Servers Properties dialog box.
Windows 2000/NT4
1
From the Start menu, choose Settings.
2
Choose Printers.
3
In the Printers window click the right mouse button.
4
In the Print Servers Properties dialog box select the Ports tab.
5
Select Port from the list then choose the Configure Port button.
6
Configure the Timers.
The following timeouts are used by the Crown Print Monitor when transporting print
jobs to the print device and reporting their print status to Print Manager:
a Status update interval
Determines how often the Crown Print Monitor updates Print Manager with sta-
tus information on the print device attached to the port. Scroll through the list box
and select a value between 1 and 600 seconds. The default is 5 seconds.
b Status request timeout
Sets the amount of time that the Crown Print Monitor waits for a response from
the print device before notifying Print Manager that the device is not responding.
Scroll through the list box and select a value between 1 and 600 seconds. The
default is 10 seconds.
c Send request timeout
Sets the amount of time that the Crown Print Monitor waits for a print job to be
sent before it returns control to the Microsoft Windows NT4 Print Spooler. Scroll
through the list box and select a value between 1 and 600 minutes. The default is
60 minutes.
If this timeout expires and the job was
sent via... Then this is what happens...
2000/NT4 Server The print job is automatically terminated and
cleared from the system.