Konica Minolta HDD Backup Utility - Manual (Page 21)

Restoring 6
HDD Backup Utility 6-1
6 Restoring
The data backed up from the media in the multifunctional product can be re-
stored (recovered) to the multifunctional product from your computer.
The restoration operation is performed after the Restore wizard is started and
the necessary settings have been specified.
2
Reminder
Data can only be restored to the multifunctional product specified during
the backup operation.
2
Reminder
The data on the media in the multifunctional product is overwritten when
the restoration operation is performed.
2
Reminder
The data to be restored must have been saved on an auxiliary data stor-
age device connected directly to your computer.
2
Reminder
Never turn off the multifunctional product whose data is being restored
while the restoration operation is being performed.
2
Note
The restoration operation cannot be performed if the multifunctional
product to be restored is being operated or is in Administrator mode.
2
Note
Depending on the size of the media to be backed up, the restoration op-
eration may take more than ten hours.