beautypg.com

Here i’m in command, Understanding the control panel, Argherita – Ariston MARGHERITA A 1635 User Manual

Page 4

background image

M

ARGHERITA

Margherita - Instructions for installation and use

I

G

L

F

E

H

N

M

O

A

B

C

D

effectiveness of the liquid

additives, thus allowing more

resistant stains to be removed.

When you press the stain removal

button, you cannot activate the

pre-wash cycle (I).

Prewash

With this button, you can pre-

wash on all programmes except

the wool programme and the

special programmes (see page 4).

If you use this function, you

cannot use the stain removal

button (H).

On-off

When button L is pressed, the

washing machine is switched on,

when it is not the machine is

switched off.

Turning the appliance off does

not cancel the selected

programme.

The on-off lamp

Lamp M flashes when the

appliance is switched on and

awaiting a programme to be set.

A steady light means the

appliance has accepted the

selected programme.

The door block lamp

The safety lamp indicates that the

washing machine door is locked

to prevent it from being opened

accidentally. To avoid any

damages to lock mechanism, you

must wait for the lamp to

extinguish, before attempting to

open the door which takes

around three minutes.

Programme key

This contains the descriptions of

the wash programmes and the

various functions connected to

the buttons. Pull it outwards to

open it.

Rinse-Hold

This button allows you to

interrupt a programme (on

symbol ) keeping the washing

soaking in water before the spin

cycle. It is a very useful button

in particular because it can be

used for delicates and synthetics.

It is only to be used with wash

programmes for synthetic fabrics,

silk and curtains when it is

impossible for you to take the

washing out immediately. Before

opening the washing machine

door, finish the wash cycle as

follows:

Silk and curtains: press button

F and Margherita will drain the

water.

Synthetic fabrics: press button F

if you want a spin cycle, or turn

knob A to symbol

if you

want the water to be drained.

With "Daily wash" or "Hand

wash", this function is not

enabled.

Rapid wash

This button reduces the length of

the wash programme by about

30%. It cannot be used with

special programmes (see page 4)

or those for wool and silk.

Stain removal (see page7)

Thanks to this command, Mar-

gherita will carry out a more in-

tensive wash that optimises the

Here I’m in command

Understanding the control panel

Making the right choice is important. And it’s easy.

Margherita ’s knobs are hidden. Just

press them lightly in the middle to

extract them.

Programme selector knob

and programmed start

Use this knob to select the wash

programme.

Turn this knob clockwise only.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the glass O.

Now press on/off button L

(position ON), pilot lamp M will

start flashing.

After 5", the setting will be

accepted, pilot lamp M will stop

flashing (staying lit) and the wash

cycle will begin.

Should you wish to interrupt the

programme in progress or set a

new one, select one of the

symbols

(Stop/Reset) and wait

5" : when the cancellation has

been accepted, pilot lamp M

flashes, and you can then turn the

appliance off.

Delay timer

You can use this knob to delay

the appliance's operation.

Select one of the four delay time

positions, press the on/off button

L (position ON) and wait 5". The

setting has now been accepted

(pilot lamp M stays lit) and you

can select the programme you

desire.

Pilot lamp M has a particular

flashing motion (2" on and 4"

off) to indicate that a delayed

start has been set.

During this phase, you can open

the appliance door and change

the washing load, should you

wish to do so.

After the wash cycle has been set

and accepted by the washing

machine, turning the knob will

have no effect (except for when

it is on position Stop/Reset).

Temperature control knob

It is used to set the wash tempe-

rature in the recommended

programme table on pag. 4. It also

allows you to reduce the tempe-

rature recommended for the

selected programme, and even to

set a cold wash cycle ( ).

Spin exclusion knob

It is used to exclude the spin

cycle (by choosing symbol ) or

to reduce the spin speed of the

selected programme. The

maximum speed for the four

types of fabric are:

Fabric

Speed

Cotton

1600 rpm

Synthetics 800 rpm

Wool

600 rpm

Silk

no

Note: distribution phase will be

carried out at low speed.

Detergent dispenser

It is divided into three

compartments:

1. Detergent for pre-wash;

2. Detergent for the main cycle

wash;

3. Fabric conditioner.

The washing machine is

equipped with an extra

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

The detergent dispenser with
the additional bleach
compartment is here.

3

MAX

1

2

4

3