Hitachi CP-S240 - Manual (Page 3)

3
ENGLISH
Adjusting the projector's elevator
Adjusting the projector's elevator
CAUTION ►If you press the elevator button without holding the projector,
the projector might crash down, overturn, smash your fingers and possibly result
in malfunction. To prevent damaging the projector and injuring yourself, always
hold the projector whenever using the elevator buttons to adjust the elevator feet.
►Do not incline the projector rightward or leftward. Also do not incline it backward
or forward exceeding 9 degrees. Exceeding these range could cause malfunction,
and could shorten the lifetime of the consumables.
►Except for inclining by the elevator feet adjustment, place the projector horizontally.
1.
After making sure that the projector is cool
adequately, press and hold in the elevator buttons
while holding the projector. The elevator buttons and
the elevator feet are on the both sides.
2.
Raise or lower the projector to the desired height
and release the elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
3. If necessary, you can also finely adjust the height of the projector by twisting
the elevator feet by hand.
Elevator
button
Elevator feet