Audiovox SS91 - Manual (Page 6)

128-8840
6 of 8
6
Remove three #0 philips head screws
where indicated to gain access to the
CR 2032 battery. Carefully remove
transmitter back cover.
Carefully remove the discharged battery by
sliding it out from under the clip in the
direction indicated by the arrow in the
diagram below.
Properly dispose of the exhausted battery and
insert a new CR2032 taking care to arrange it
so that the + is facing up toward the + symbol
on the battery clip.
This device complies with FCC Rules Part 15 Operation is subject to
the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that may be received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s
authority to operate the equipment.