Asus MyPal A600 - Manual (Page 10)

1-6 Chapter 1
Setting up MyPal
Placing on the cradle
Connecting the AC adapter
• Connect the AC adapter cable to the connector at the back of the cradle.
Connect the power plug to a grounded wall socket. See Figure 1.
• If you are not using the cradle, connect the AC adapter cable directly to
the power connector at the bottom of the device. Connect the power plug
to a grounded wall socket. See Figure 2.
Position the device on the cradle as shown
on the right. Match the connectors and
carefully insert the device until it fits in place.
The illustration on the left shows MyPal
properly installed on the cradle.
Figure 1 Figure 2