APW Wyott Cooker / Warmer Merchandising Systems CWM-2SP - Manual (Page 2)

Cooker / Warmer
Merchandising Systems
PRODUCT: QUANTITY: ITEM #:
Models: CWM-2A CWM-2V CWM-2SP
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· [email protected] Rev. 5/22/2005
#1507
Cooker Warmer Countertop Systems (CWM) are constructed of stainless steel material around the exterior base and
deep drawn stainless steel for the food well. Side handles are provided. Unit will be heated with a 1500 sepentine
shaped heating element. Heat control shall be a Bi-Met thermostatic control. Each unit should have a 6 ft. long power
cord and one inch rubber legs. Units with drains include a side drain spicket for easy removal of water in well. Units are
UL listed, UL Sanitation, and ULC listed.
PRODUCT SPECIFICATIONS
Construction:
Stainless steel exterior and interior, chrome plated side
handles, 1” bottom insulation, 1” rubber legs. Drain versions
have chrome plated drain spicket.
Electrical Information:
Each unit is equipped with a 60”, three wire grounded
power cord which terminates with a standard three pronged
male plug. The 120V unit uses a NEMA 5-15P plug.
Electrical Specifications:
CWM (all)
120V, 1500W, 12.5 Amps
Capacity:
CWM 2A/2V 22 qt. (holds one 12x20 pan or
three 1/3 size pans.
CWM 2SP Holds two 7 qt. insets
Overall Dimensions:
CWM (all) 11.26”H x 14.5”W x 22.5”D
(28.6cm x 36.83cm x 57.15cm)
Shipping:
CWM-2A 29 lbs. (13.15 kg)
CWM-2V 29 lbs. (13.15 kg)
CWM-2SP 34 lbs. (15.42 kg)
FOB: Dallas, TX 75226
Consultant Specifications
*APW Wyott reserves the right to modify specifications
or discontinue models without incurring obligation.
22.500
11.262
3.916
11.805
24.959
14.500