Lenovo C460 All-in-One - Manual (Page 60)

Step 22. Lift up the chassis to separate the chassis from the panel.
Step 23. To install the new the LED panel:
For two point touch model, the new LED panel
module including: LED panel, touch cable, converter board cable,
LVDS cable
For five point touch model, the new LED panel
module including: LED panel, touch control board, touch cable,
converter board cable, LVDS cable
a. Line up the chassis with new LED panel, and then place it into position.
b. Secure the LED panel to the chassis with the four screws.
c. Line up the chassis and new LED panel with the front bezel, and then place it into position.
d. Secure the chassis to the front bezel with the four screws.
e. Reattach all the cables.
Step 24. Reattach the camera, heat-sink, speaker system, EMI cover, middle cover, optical drive, stand
holder, foot cover and stand base.
54 Lenovo C460 All-In-One ComputerHardware Maintenance Manual