Advent CAM330 - Manual (Page 10)

10
Specifications
1. Voltage: DC12V
2. Current: 50 mA
3. Signal System: NTSC
4. Image Sensor: ¼” CMOS Sensor
5. Horizontal Resolution: 480 lines
6. Viewing Angle: 160 degrees
7. Minimum Illumination: 0.7 Lux
8. Image Display: Selectable Normal/Reverse Image
9. Adjustable Viewing Angle
10. Dimensions:
• Camera: 18mm W
• License Plate Bracket: 196mm W x 36mm H
Troubleshooting
Symptom Solution
No video signal appears while
reversing the vehicle 1. Check the rear view camera
lens and clean if needed.
2. Check the rear view camera
wiring connection and RCA
connection.
3. Check the fuse, if blown
replace ONLY with the correct
size.
Video image is not sharp enough Clean the camera lens.