Initial setup instructions – Lenovo S310 All-in-One User Manual

Page 6

Safety, Warranty, and Setup Guide

VGA in connector
HDMI out connector
System stand

Attention: Never block or cover the ventilation slots, especially the

ventilation slots beneath the computer handle. Blocking the ventilation
slots will cause the computer to overheat.

Initial setup instructions

Note: Depending on your model type, your computer might not have all

the connectors that are described in this section.

1. Connect the mouse cable to a USB connector.

USB 2.0 connector

Note: If you are using a wireless mouse, set up your wireless mouse by

referring to the following illustrations. Your wireless mouse might look
slightly different from the illustrations.

Figure 1. Steps to install a wireless mouse

1. Open the mouse battery-compartment cover.
2. Remove the USB dongle from the mouse.
3. Connect the USB dongle to any USB connector on the computer.
4. Insert two AAA batteries into the mouse.

31505241 Lenovo S310 SWSG V1.0 (EN)(R).indb 5

2013-7-15 19:03:00