Lenovo IdeaCentre Q200 - Manual (Page 11)

6
User Guide
S ——— S Video Connector: To connect the data cable of the S video. (Some
models are equipped with this connector.)
V ——— Video Connector: To connect with the Video to S-Video converting
cable provided in the computer. (Some models are equipped with
this connector.)
FM ———— FM Antenna Connector: To connect an FM antenna provided with
the computer. (Some models are equipped with this connector.)
———— TV Antenna Connector: To connect the signal input cable for the
CATV. (Some models are equipped with this connector)
L&R ——— Left and right audio connector: Audio input connector. (Some
models are equipped with this connector.)
——— Audio Line-in Connector: To connect audio input to the computer.
— Audio Line-out Connector: To connect to the speakers or
headphones.
———— Microphone Jack: To connect to audio input from a microphone.
Voltage selection switch (Some models are equipped with this switch)
Check the position of the voltage-selection switch on the rear of the computer. Use
a ballpoint pen to slide the switch, if necessary.
1. If the voltage supply range is 100-127 V ac, set the switch to 115 V.
2. If the voltage supply range is 200-240 V ac, set the switch to 230 V.
115 23
0
Figure 1 Figure 2
31032755_IdeaCentre Q-UG.indd 6 2007.12.21 2:28:20 PM