Removing the rear cover – Lenovo A730 All-in-One IdeaCentre User Manual

Page 55

Step 8.

Reattach the base cover and secure it with the screws.

Removing the rear cover

Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

To remove the rear cover

Step 1.

Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Step 4.

Remove the base cover. Refer to “Removing the base cover”.

Step 5.

Remove the hinge from the chassis. Refer to “Removing the hinge from the chassis”.

Step 6.

Raise the hinge

and slide the rear deco out as shown.

Chapter 8

Replacing hardware