Lenovo Horizon 2 27 Table PC IdeaCentre - Manual (Page 29)

Step 4. For this procedure it requires using a flat head screw driver. Use a piece of soft clothes to wrap the
screw driver head before proceeding.
Step 5. The front panel and the rear cover are pined together, use the wrapped screw driver to push into the
hole as illustrated to force the front panel separating from the rear cover. For this procedure it might
requires using some strengthens while pushing.
1 Working along the gap opened in-between the
front panel and the rear cover gently to separating the front panel from rear cover. 2
Chapter 7 . Replacing hardware 23