Lenovo C260 Touch All In One - Manual (Page 45)

Step 5. Remove the 2 screws that secure the camera to the front bezel.
Step 6. Gently slide out the camera and disconnect the cable from the camera.
Step 7. To install the new camera:
a. Connect the data cable to the new camera.
b. Line up the holes in the new camera with the mounting holes on the front bezel and secure
the new camera with the 2 screws.
Step 8. Reattach the rear cover, stand and stand cover.
Replacing the converter board
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the converter board:
Chapter 7 . Replacing hardware 39