Lenovo IdeaCentre A700 - Manual (Page 11)

6
User Guide
To open the computer stand, do the following:
The computer can be mounted on the wall.
To mount the computer on the wall, you need to install a wall mount VESA bracket
adapter* (some models are shipped with this part) on the back of the computer
as following steps. Using this bracket adapter to install a UL listed standard wall
mount (purchased separately) to make the computer mounted on the wall.
Note: For this procedure, it helps to place the computer face-down on
a soft flat surface. Lenovo recommends that you use a blanket, towel,
or other soft cloth to protect the screen surface from scratches or other
damage.
1. Pull the computer stand up and slide the little pin up into the hinge to fix the
stand.
* VESA bracket adapter spec: VESA100, 100mm x 100mm, M4 bolts.
31043530B IdeaCentre A7 UG V1.0(EN)(R).indd 6 2010-4-28 18:18:23