Using optical zoom – Kodak ZD710 User Manual
Page 10
Doing more with your camera
10
www.kodak.com/go/easysharecenter
Using optical zoom
Use optical zoom to get up to 10X closer to your subject. (You can use optical zoom
before taking a video, but you can’t zoom while recording.)
1 Use the EVF or LCD to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle (W)
to zoom out.
The zoom indicator shows zoom status.
3 Take the picture or video.
NOTE: To get a focused picture every time, remember:
■
Always use the auto focus framing marks.
■
If you are using no zoom (1X, wide angle), you
can be as close as 24 in. (60 cm) to your subject.
(For Close-up/Macro mode, see
).
■
As you zoom in, you need to move further from
your subject.
Use digital zoom in any Still mode to get up to 5X magnification beyond optical zoom.
1 Press the Telephoto (T) button past the optical zoom limit (10X).
2 Take the picture or video.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when using
digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture quality
reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Zoom indicator
W
T
D
Digital
zoom
range
Optical
zoom
range
urg_00741.book Page 10 Monday, July 23, 2007 10:27 AM