Using the self-timer, Using burst, Using the self-timer using burst – Kodak C195 User Manual
Page 17

Taking pictures/videos
www.kodak.com/go/support
11
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any picture-taking mode, press the Info
button to turn on the shortcut icons.
2 Press
to highlight the self-timer
icon. Press
to choose a setting:
10 seconds—
A picture is taken after a 10-second delay (so you have time
to get into the scene).
2 seconds—
A picture is taken after a 2-second delay (for a steady, shutter
release on a tripod).
2 shot—
The first picture is taken after a 10-second delay. A second picture
is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use the burst feature to take up to 3 pictures in rapid succession. You can turn on
burst using a shortcut (
) or these steps:
1 Press the Menu
button.
2 Press to
choose
Self-timer/Burst, then press
to choose Burst On.
3 Press the Menu
button.
4 Compose the scene. Press the Shutter button halfway, then completely down
and hold it.
The camera stops taking pictures when you release the Shutter button, when pictures
are taken, or when there is no more storage space. Burst is unavailable in some modes.
10
2
2x