Kodak M1073 IS - Manual (Page 45)

Transferring, printing, tagging
www.kodak.com/go/support 39
Printing from an EasyShare all-in-one printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu interface turns off, press any
button to redisplay it.
2 Highlight a printing option, then press OK.
Current Picture— Press to choose a picture. Choose the number of copies.
Tagged Pictures— If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Print— Print thumbnails of all pictures. (This option requires one or more
sheets of paper.) If the printer is capable, choose a print size.
All Pictures— Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage— Access Internal/Card or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see page 37 . In Favorites mode, the current favorite picture is displayed.
Disconnecting the camera from an EasyShare all-in-one printer
1 Turn off the camera and printer.
2 Disconnect the USB cable from the camera and the printer.
Using a printer that is not PictBridge enabled
For details on printing pictures from your computer, click the Help button in EasyShare
software.