Kodak V1253 User Manual
Page 59
Troubleshooting
www.kodak.com/go/support
53
Picture quality problems
Computer does not
communicate with
the ca mera
■
Make sure the battery is charged and installed correctly (see
■
Turn on the camera .
■
Make sure the USB cable model U-8 is connected to the camera
and the computer (see
). (If using an EasyShare dock,
check all cable connections. Make sure the camera is seated on
the dock.)
■
Make sure EasyShare software is installed (see
).
Status
Solution
Picture is not clear
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clea n the lens (see
■
Make sure the camera is not in Ma cro mode if you a re more than
27.6 in. (70 cm) from your subject.
■
Place the camera on a fla t, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Picture is too dark
■
Reposition the camera for more ava ilable light.
■
Use Fill flash (see
) or change your position so light is not
behind the subject.
■
Move so tha t the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Status
Solution