Kodak CD43 - Manual (Page 48)

42 www.kodak.com/go/support
Troubleshooting
Flash does not fire ■ Check the flash setting and change as needed ( page 25 ).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full ■ Transfer pictures to the computer ( page 15 ).
■ Delete pictures from the card or insert a new one ( page 13 ).
■ Change image storage location to internal memory ( page 30 ).
Battery life is short ■ Make sure the correct battery type is loaded ( page 1 ).
■ Wipe the contacts with a clean, dry cloth ( page 57 ) before inserting
a battery in the camera.
■ Insert a new or charged battery ( page 1 ).
You cannot take a
picture ■ Turn the camera off, then on again. Make sure the camera is not in
Favorites mode.
■ Depress shutter button completely down ( page 4 ).
■ Insert a new or charged battery ( page 1 ).
■ Wait until the Ready light glows green before attempting to take
another picture.
■ Memory full. Transfer pictures to the computer ( page 15 ), delete
pictures from the camera ( page 13 ), change image storage
location, or insert a new card.
Error message
appears on LCD
screen ■ Turn the camera off.
■ Remove memory card from the camera.
■ Remove the battery and wipe the contacts with a clean, dry cloth
(
page 57 ).
■ Insert a new or charged battery ( page 1 ).
■ Turn on the camera.
■ If all else fails, get customer support help ( page 46 ).
Memory card not
recognized or camera
freezes with card. ■ Card may be corrupted. Format card in camera ( page 32 ).
■ Use another memory card.
If... Try one or more of the following