Setting the date & time, first time, Setting the date & time, anytime, Setting the date and time – Kodak Z760 User Manual
Page 10
3
www.kodak.com/go/support
Getting started
Setting the date and time
Setting the date & time, first time
The Date and Time have been reset message appears the first time you turn on the
camera or if the battery is removed for an extended time.
1 SET DATE & TIME is highlighted. Press the OK button.
2 Go to step 4 in
Setting the date & time, anytime
Setting the date & time, anytime
1 Turn on the camera. Press the Menu button.
2 Press
to highlight Setup Menu
, then press the OK button.
3 Press
to highlight Date & Time
, then press the OK button.
4 Press
to adjust the date and time. Press
to advance to the next
setting.
5 When finished, press the OK button.
6 Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera
clock when you connect the camera. See the EasyShare software Help for details.